How to store reinforced all-resin carbon tape when not in use for a long time?

When not used for a long time, the following points need to be paid attention to when storing the reinforced all-resin carbon belt to ensure that its performance is not affected:

Storage environment

1.Dry ventilation: the carbon strip should be stored in a dry and well-ventilated environment to avoid humidity and high temperature to prevent the volatilization of the resin layer and the hardening of the carbon strip layer.

2.Light preservation: Avoid direct sunlight, because ultraviolet light may cause damage to the carbon strip material.

3.Suitable temperature: try to store the carbon strip in a place with low temperature and low humidity, the ideal storage temperature is room temperature or slightly lower, but avoid extreme low temperature environment to prevent the carbon strip from becoming brittle.

Packing requirement

1.Keep the package intact: If the carbon tape originally had a sealed package, try to keep the package intact to prevent dust, moisture, and other contaminants from entering.

2.Repackage: If the package has been opened, repackage the carbon strip using a clean, well-sealed container or bag to keep it dry and clean.

Avoid mechanical damage

1.Handle gently: When handling and storing the carbon belt, it should be handled gently to avoid severe vibration and impact to prevent damage to the carbon belt.

2.Isolated storage: Keep the carbon strip isolated from other items that may cause damage to it to prevent scratching or indentation.

Periodic inspection

1.Check status: Check the status of the stored carbon strip regularly to ensure that it is not damp, deformed or otherwise damaged.

2.Record information: Record the storage time, environmental conditions and inspection of the carbon belt, so that it can trace its historical status if necessary.

In summary, enhanced all-resin carbon strips that are not used for a long time should be stored in a dry, ventilated, sheltered from light, and at a suitable temperature, and should be kept intact or repackaged. At the same time, mechanical damage should be avoided and its condition should be checked regularly. These measures help to ensure that the carbon strip can maintain good performance and use effect after a long time of storage.